How to create tunnel between Cisco 5508 (IRCM) and 9800

First, we put the IRCM image on the 5508.

 

 

 

 

 

 

Here are the test APs on the Junktown controller:

 

 

 

 

Here is the mobility configuration – this builds the tunnel between the 5508 running IRCM code and the 9800:

 

Password:********

(jkn001-011-wc03) >config mobility group member add 4c:ec:0f:2a:a3:ab 10.64.25.5 JKN encrypt enable

(jkn001-011-wc03) >config mobility group member data-dtls 4c:ec:0f:2a:a3:ab disable

(jkn001-011-wc03) >save config

Are you sure you want to save? (y/n) y

Configuration Saved!

(jkn001-011-wc03) >

 

 

 

Here is the config on the 9800:

 

jkn001-011-wc01(config)#wireless mobility group name JKN

Changing mobility domain name may disrupt connectivity for clients on 11r or Adaptive 11r capable active WLANs

Are you sure you want to continue? (y/n)[y]: y

jkn001-011-wc01(config)#

jkn001-011-wc01(config)# wireless mobility group member mac-address 4c00.8271.5040 ip 10.64.25.15 public-ip 10.64.25.15 group JKN

jkn001-011-wc01(config)#

 

Then the tunnel comes up:

 

*Aug 8 14:26:56.744: %MM_NODE_LOG-6-MEMBER_ADDED: Chassis 1 R0/0: mobilityd: Adding Mobility member (IP: IP: 10.64.25.15: JKN)

*Aug 8 14:27:15.588: %SYS-5-CONFIG_P: Configured programmatically by process SEP_webui_wsma_http from console as tdennehy on vty1

*Aug 8 14:27:17.803: %MM_NODE_LOG-5-KEEP_ALIVE: Chassis 1 R0/0: mobilityd: Mobility Data tunnel to peer IP: 10.64.25.15 changed state to UP

*Aug 8 14:27:31.782: %MM_INFRA_LOG-3-RECV_FAILED: Chassis 1 R0/0: mobilityd: Unable to receive mobility message aplist_update from ipv4: 10.64.25.15 . reason: Peer link is down

*Aug 8 14:28:17.802: %MM_NODE_LOG-5-KEEP_ALIVE: Chassis 1 R0/0: mobilityd: Mobility Control tunnel to peer IP: 10.64.25.15 changed state to UP

*Aug 8 14:29:03.353: %SYS-5-CONFIG_P: Configured programmatically by process SEP_webui_wsma_http from console as tdennehy on vty1

jkn001-011-wc01(config)